ART. 1860 WAX MOULDING FOR SOLES AND HEELS

Coloured and pigmented wax emulsion, bound by natural and synthetic polymers, used for the transparent finishing of leather soles.

Ideal for
Leather soles, smooth, edges, and heels that require a transparent, uniform, and easily polished finish.

Usage
Apply with a brush or a special machine to sanded soles. Leave to dry and brush with a cloth rotary brush previously impregnated with neutral or coloured abrasive wax; then polish with a wool brush onto which carnauba wax has been applied.
Applied to smooth and heels, it can be polished by hand or with a rotary brush. The edges are generally polished with a cotton rotary wheel previously treated with carnauba wax. During this operation, it is advisable to apply good pressure to distribute the wax evenly on the edges of the shoe. Subsequently, brush again with the rotary wheel without wax and at a lower speed. Smooth edges with a shaped profile can be treated hot with irons or rollers corresponding to the cutter's profile. Shake well before use.

Advice
Ideal for achieving a transparent and uniform finish on soles, edges, and heels, enhancing the surface with a progressive and controlled polish.

Available colours:
Neutral, Coloured (see colour chart)
Available packaging:
1 litre, 5 litres, 10 litres

PLEASE NOTE: IT IS ALWAYS NECESSARY TO CHECK IN ADVANCE
Compatibility of your items with our products
Please contact us for the technical and safety data sheet at iexichem@iexi.com